WARP Project Forums - Wireless Open-Access Research Platform

hi

i got always the erro message from XPS, wenn i try to run one of the Lab 2, Labs 4-6 from http://warp.rice.edu/trac/wiki/Workshops/Rice_2010March :

*********************************************
Downloading Bitstream onto the target board
*********************************************
impact -batch etc/download.cmd
Release 10.1.03 - iMPACT K.39 (nt)
Copyright (c) 1995-2008 Xilinx, Inc.  All rights reserved.
Preference Table
Name                 Setting             
StartupClock         Auto_Correction     
AutoSignature        False               
KeepSVF              False               
ConcurrentMode       False               
UseHighz             False               
ConfigOnFailure      Stop               
UserLevel            Novice             
MessageLevel         Detailed           
svfUseTime           false               
SpiByteSwap          Auto_Correction     
AutoDetecting cable. Please wait.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS
12:35:07, version = 811.
No resources.
No resources.
Cable connection failed.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS
12:35:07, version = 811.
Cable connection failed.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS
12:35:07, version = 811.
Cable connection failed.
Connecting to cable (Parallel Port - LPT4).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS
12:35:07, version = 811.
Cable connection failed.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Driver file xusb_emb.sys found.
Driver version: src=1029, dest=1029.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS
12:35:07, version = 811.
Cable PID = 0008.
Max current requested during enumeration is 74 mA.
Type = 0x0004.
Cable Type = 3, Revision = 0.
Setting cable speed to 6 MHz.
Cable connection established.
Firmware version = 1303.
File version of c:/Xilinx/10.1/ISE/data/xusb_xlp.hex = 1303.
Firmware hex file version = 1303.
PLD file version = 0012h.
PLD version = 0012h.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc4vfx100, Version : 6
INFO:iMPACT:1777 -
   Reading c:/Xilinx/10.1/ISE/virtex4/data/xc4vfx100.bsd...
----------------------------------------------------------------------
----------------------------------------------------------------------
'2': : Manufacturer's ID =Xilinx xccace, Version : 0
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Elapsed time =      0 sec.
Elapsed time =      0 sec.
'2': Loading file 'implementation/download.bit' ...
INFO:iMPACT:501 - '1': Added Device xc4vfx100 successfully.
INFO:iMPACT:1777 -
   Reading c:/Xilinx/10.1/ISE/acecf/data/xccace.bsd...
INFO:iMPACT:501 - '1': Added Device xccace successfully.
done.
INFO:iMPACT:1777 -
   Reading c:/Xilinx/10.1/ISE/virtex2p/data/xc2vp70.bsd...
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Elapsed time =      0 sec.
----------------------------------------------------------------------
----------------------------------------------------------------------
INFO:iMPACT:501 - '2': Added Device xc2vp70 successfully.
INFO:iMPACT:583 - '2': The idcode read from the device does not match the idcode
   in the bsdl File.
INFO:iMPACT:1578 - '2':  Device IDCODE :        00000001111011100100000010010011
INFO:iMPACT:1579 - '2': Expected IDCODE:    00000001001010111010000010010011
make: *** [download] Error 1
Done!


so are these workshop material (March 29-30, 2010) support my WARP FPGA V2.2 Board?